 |
 |
 |
Converteam has over 100 years of experience of providing motors for diverse and worldwide installation, from offshore platforms to harsh desert environments.
For all types of pumps or compressors, whatever the application requires fixed or variable speed, Converteam offers a wide range of electric motors:
- induction or synchronous
- conventional or high speed
- all types of cooling systems
- conventional or for use within hazardous area
- ATEX certified for hazardous area
Fixed or Variable Speed Motors
| Motor Range | Power | Motor Type | Speed | Voltage |
| F3 | Up to 3MW | Induction motor | Up to 3,600 rpm | Up to 13.8kV |
| N3 | Up to 40MW | Induction motor | Up to 3,600 rpm | Up to 20kV |
| AKG | Up to 1.6MW | Induction motor: flameproof | Up to 3,600 rpm | Up to 11kV |
| MGV | Up to 25MW | Induction motor: high speed | 6,000 to 18,800 rpm | Up to 6.6kV |
| S3 | Up to 15MW | Synchronous motor | Up to 1,800 rpm | Up to 3.8kV |
| MS | Up to 40MW | Synchronous motor | Up to 1,800 rpm | Up to 3.8kV |
| 2pT | Up to 100MW | Synchronous motor 2 poles turbo | 3,000 to 6,000 rpm | Up to 6.6kV |
AKG series designed to comply with ATEX directive
When chemical or petrochemical products are being manufactured, stored, transported or handled in general, gas, vapours or mists may be given off which may be explosive in certain mix ratios with air. Explosion-protected electrical equipment must be used in areas where these explosive mixes may occur.
Converteam’s AKG series is designed for hazardous area (Eex d) up to group II-C. They are ATEX certified per the latest directive 94/9/EC.
The AKG motors are Explosion proof Eex d, totally enclosed fan cooled motors for medium voltage application from 2,000 to 11,000 Volt at 50 or 60Hz. Motors at other voltages and frequencies are available on special request.
The motors are available in 4 shaft heights (355mm, 400mm, 450mm and 500mm) with mechanical arrangements: IM 1001, IM B3, IM 3011 and IM V1.
The motors are fitted with grease-lubricated or oil-lubricated bearings. On request, all these motors can be fitted with ring self-lubricated sleeve bearings (except for II-C applications).
Corrosion protection: these motors are given special protective treatment to withstand corrosive atmospheres, based upon polyurethane coating. They are fitted with chromate conversion coated zinc plated screws and bolts.